Individual spindle control
Computer yarn length measurement.
Yarn speed is available for 300~1600 meter/per min.
It depends on type of thread to be wound,800~1400 meters/per min is normally recommended
Auto lubrication system
Lube roller speed is adjustable & proportional to yarn speed.
Dosing pump lube system is also available.(option)
Drum thread guidung system
High speed,low noise operation.
Drum with special hardened polish treatment,smooth & Wear resistance.
Electro-magnetic tension device
Automatic tension release throughout the cycle for consistent winding tension.
Circulating oiling tank
Oil tank good to be connected for 36 spindles.
Hot lube take is also available.(with temperature controller)
Other characteristics
Cone,Spool type is available for S.P. threads,cotton threads & sewing threads.
Kingspool type is available for embroidery threads,nylon threads & bonded threads.
For filament yarns,fiber yarns,monofilament yarns & technical threads are subject to final confirmation.
Drum thread-guiding system
Constant lubrication system
Electro-magnetic tension
Circulating oiling tank
Hot circulatingoiling tank
Dosing pump lubrication system
Leveling lube tank
Individual spindle control
One computer terminal
| model |
|
|
| Taper angle | 0° | |
| Max. Capacity | 3200 PCS/8hrs 40/2 L=500M | |
| Max. outer | 70mm | |
| Traverse | 2" | |
| No. of spindle | 6 | |
| Spindle speed | Max 13000 r.p.m | |
| Yarn speed | Max 1600 m/min (800~1400 m/min) | |
| Cross ratio | 2.5~3 | |
| Weight | N.W.750kgs G.W.950kgs | |
| Measurement | 230L x 90W x 190H(cm) | |
| 本機器設計及規格如有更改、恕不另通知。 | ||
